Installation guide for Bixolon printer (SPP-R200II)

This guide will help you install and charge the battery for a Bixolon printer (SPP-R200II).

What you'll need

• A Bixolon printer (SPP-R200II)
• A battery charger

Preparations

Unpack the printer and all accessories in the box.

Installation

1. Insert the battery on the rear side of the printer, aligning the battery hook properly.
2. Push the battery into the slot until a snapping sound is heard.

As the battery is not charged at the time of purchase, charge the battery prior to product use. (Use the battery charger)

Battery charging

1. Turn off the printer power.
2. Connect the power cord ② to the battery charger ①, and then connect AC power.
3. Open the small external interface cap in the direction of ③.
4. Connect the battery charger to the power connector.

Paper installation

1. Press the Open button to open the paper cover.

2. Insert the paper as shown in the image. (Remove any remaining core of a fully used paper roll.)

3. Take care to align the paper correctly.

4. Pull the paper out as shown in the image and close the paper cover.

5. Tear off any excess paper in the direction of the side of the printer.